Call: 925-294-8062

Avoiding Exterior Paint Problems When House Painting Pleasanton

Avoiding Exterior Paint Problems When House Painting Pleasanton

Avoiding Exterior Paint Problems When House Painting Pleasanton

Some of the many inconveniences that homeowners face when doing house painting in Pleasanton are the common problems found on their home’s exterior surface. Painting the exterior is much more complex than painting the interior due to the environmental elements which the house’s exterior surface must endure.

The end solution to these problems is a fresh coat of paint. In order to avoid encountering similar problems again it helps to follow the right procedures. This includes properly cleaning and prepping the surface, before applying paint on them. As long as you have good-quality paint, superior tools and materials, and proper painting procedures, you can prevent these problems from happening, at least for quite some time. Having knowledge regarding exterior surface problems is also a plus when you do house painting in Pleasanton.

  • Peeling – one of most common exterior surface problems is peeling. There are many causes including too many coats of old paint, moisture, and a poorly prepared surface that is chalky, greasy, or slick. Proper preparation of the surface is the key to avoid these problems. But if it’s too late and your house’s exterior is already showing signs of peeling, you can get rid of them by scraping off the peeling paint, sanding, power washing, or using a heat gun.
  • Blistering – another common and annoying surface problem is blistering, or “bubbles.” Blistering is usually linked to moisture and can occur even in a fresh coat of paint. Blisters form when the vapors that are attempting to escape are instead trapped by the paint. To avoid blistering, prepare the surfaces thoroughly, then let them completely dry. You should not also paint in direct sunlight because the heat makes the paint dry too quickly, trapping the vapor. Nor you should paint when there is dew, rain, or very high humidity. Poor quality paints can also be the culprit, so to avoid blistering you may want to buy and use only good quality paints.
  • Chalking – you can identify chalking by the fine, chalk-like powder that forms on the surface of the paint film. This is the result of a chemical breakdown of the pigments, binders and solvents in pain; light-colored paints are usually more prone to chalking than darker-colored ones. This may be caused by environmental factors, poor priming, overly thinned paint, or applying the paint too thin. Fortunately, this is easy to address. Remove the chalky powder by washing the surface using water, cloth or a nylon scrub, and detergent. It’s recommended that you use a cleaning solution that is specialized for masonry cleaning if your home has masonry siding. If using these items doesn’t work, you can wash the exterior by using trisodiumphosphate (TSP) solution. You can also use a power washer. After washing the surface, let the surface completely dry, then apply high-quality paint.
  • Cracking and chipping – this problem, also known alligatoring due to its appearance, looks like a pattern of cracks on the surface of the paint film which looks like alligator’s scales. This is the result of several factors. It may be that the second coat of paint was applied before the first coat was completely dry. It can also be the result of using incompatible paints. For instance, a coat of flat-finish paint is applied over glossy paint. Oil-based paints that are naturally aging may also exhibit signs of alligatoring. Prep work involving sanding, scraping, filling, and priming can remove this problem. Then you will want to use good quality paint on the surface.
  • Mildew – Mildew is another surface problem characterized by brown, black, or gray spots on the surface of the paint or caulk. This is caused by the presence of fungi on the paint’s surface. Moisture is the culprit of mildew, which usually forms on walls with northern exposure and the underside of eaves which are damp and not exposed to sunlight.
    To get rid of the mildew, clean it with a household bleach solution, consisting of one part bleach and three parts water. Make sure you wear gloves and eye protection while cleaning the surfaces. Leave the bleach solution on the surface for a while to make sure that it gets rid of all the mildew. Rinse afterwards, then thoroughly clean the surface with a detergent solution to make sure that all the dirt that the mildew feeds on is completely removed. You can wash it by hand or by a power washer. Let the surface completely dry before applying good quality paint.

You will have greater chances of preventing these exterior surface problems again if you follow these tips the next time you do house painting in Pleasanton.


Swatch Book

Custom Painting Inc

Tell A Friend

Fremont, Hayward Area
(510) 795-0903
Livermore, Dublin, Pleasanton Area
(925) 294-8062
San Ramon, Danville, Alamo Area
(925) 866-9610
Walnut Creek, Concord Clayton,
Pleasant Hill Lafayette, Orinda Area
(925) 686-0903