Commercial Painting Services San Jose -Why Commercial Buildings Need Primers

One of the benefits of hiring commercial painting services in San Jose is the quality results that they provide. By thoroughly inspecting the condition of the business site, these professionals can tell if it needs more than just a coat of paint. Then, they will use appropriate paints and other coatings (if necessary) to restore the good condition of the building, beautifying it, and making it look brand new again.

For businesses, appearances matter a lot. If the paint fades away too quickly or does not adhere well to the surface, it will cause a variety of surface problems. Paints that peel, flake, and crack will not look so pretty to the customers’ eyes, and your business may suffer because of it.

Exterior surfaces are hit the hardest, because they deal with temperature extremes, harsh outdoor weather, and pollution day in and day out. Therefore, they require paints and other coatings of really good quality to withstand these elements.

Interior surfaces, on the other hand, are often not affected by the outdoor environmental changes as their exterior counterparts. So, it’s safe to assume that they don’t have to be applied with the same care and attention as exterior surfaces do. Many business owners consider speeding up the job by applying interior surfaces with just one coat of paint and be done with it.

Exteriors and interiors may not require the same level of care and attention, but both surfaces deserve to be painted beautifully. After all, you want your business to look good inside and out.

While you can finish the paint job faster using fewer coats, it’s crucial to take a second look at the real consequences of what is basically a rushed paint job. Many exterior and interior coatings are formulated to reach their full potential only when a primer is used.

Depending on the type and condition of the surface, it’s not always necessary to apply primer, but it’s always a good idea. All things considered; a primer is a foundation of a well-painted surface.

A primer is usually white, but it can be now available in other neutral colors. Why only neutrals? This is to provide a neutral base to ensure that the colors of the topcoat show true. A primer is the most helpful when you decide to paint your current dark walls with new paint of a much lighter color.

There is no need to add color to the primer itself, but some paint manufacturers may add only a small amount of tint to the primer to make it look closer to the color of your topcoat.

Why prime before painting?

Here are some of the following reasons why a primer is necessary when the job calls for it:

1) It prepares and seals unfinished surfaces

It helps seal pores in unpainted and unfinished surfaces such as new drywall and wood, allowing better uniform distribution and adherence of the topcoat.

2) It helps paint to adhere better to the surface

The primary purpose of a primer is to enable the topcoat to adhere more effectively to the surface. The primer’s chemical composition reacts to create a firm binding layer, typically through binder-rich synthetic resins. For better durability, some primers contain polyethylene (plastic). Hard, glossy surfaces, such as ceramic tiles, are typically difficult to paint. However, it will be easier to work with them when they’re applied with primer.

3) It blocks stains and odors

Stains are annoying, and even with several coats of the new paint, they will still bleed through it. Odors, such as smoke from cigarettes, have also the same unpleasant effect on the walls. Fortunately, primer is the solution in tough situations like these. It blocks stains, odors, and other contamination in the lower layers of the substrate, preventing them from reaching deeper into the surface in the future.

4) It protects the surfaces against moisture

Moisture is a persistent problem that can cause serious damage and degradation especially to low-cost and inferior commercial paints. The problem becomes more troublesome in high-humidity areas such bathrooms, kitchens, and shaded parts of exterior surfaces where there is not enough sun exposure. Primer protects against these effects. Some types of primers have certain properties that can help prevent the spread of mold and mildew.

5) It creates a better finish

Primers ensure the best longevity and durability of the topcoat. With primer, the paint spreads more evenly and uniformly, making the surface look good, smooth, and durable. And with such a long-lasting finish, maintenance costs can be significantly reduced.

Primers also provide a good color base if you intend to paint a new light-colored paint over the current darker paint. Primers can be even tinted to match your desired paint color more closely. Thus, it potentially reduces the amount of paint you need.

Offices, shops, restaurants and cafes, and other commercial spaces must look sleek, professional, and attractive to clients and employees. They also need paints that are durable enough to withstand traffic for a long time, with less maintenance. It’s unbelievable to think that only primers can do them all, but they do!

Some specialty coatings and other surface treatments are especially formulated so that primer won’t be needed. In cases like these, commercial painting services in San Jose should follow the manufacturer’s directions. But for the most part, primers have earned an important and indispensable place in every commercial paint projects.